|
|
|
Hazardous Storage Vaults, Safety Vaults, Liquid Storage Units |
These Hazardous Storage Vaults, Safety Vaults, Liquid Storage Units are designed to comply with the Flammable Liquid Storage Regulations (1972) as appropriate and the Factory Inspection Guide HSG51
- Adjustable vent meets the requirements of both Flammable Storage (vent closed) and Agrochemicals (vent open).
- All welded units conform to A.P.E.A. Construction requirements.
- Manufactured from 2.5mm sheet steel, providing 30 minutes protection from collapse and the passage of fire
- Multi-lockable for high security
- Manufactured in the UK
- Fitted with a lift-up action lid assisted by gas struts
- Units have skids on base for extra protection and also to allow ease of movement by fork lifting
- Middle shelves pivot on Model 1 and Model 2 (shown) to enable larger items to be stored on the base level
- Model 1 and Model 2 (shown) have a liquid tight base to contain spillage
- Model 3 has a central partition and four shelves. The two middle shelves fold away and the two top shelves are made in three sections. The back section is fixed in position and the front two sections are removable.
- Model 3 also has two drip trays located in the base which are covered with 25 x 25mm removable mesh grids, also acting as a lower shelf
Safety Notice
Before storing herbicides and petroleum based products, we recommend that you contact the following for specific guidance:
- Health & Safety Inspector
- Trading Standards Officer
- Environmental Health Officer
- Fire Officer
| Please note | A fork lift will be required to unload these Hazardous Storage Vaults |
Main image shows Model 2
|
|
